I swear, when those dye pots start going, I cannot stop myself stooping over, wringing my hands and cackling like one of Macbeth’s witches. I just want to show you a peek here of some grey yarn.
Ok, so the picture isn’t that fantastic, but can you see the sparkles?! This is a new base, 96% Falkland merino and 4% Lurex, which is giving it the sparkle factor. It is a UK spun DK, with 240m approx. in 100g. I haven’t yet got a name for this little beauty, although some lovely people on Facebook have made suggestions. So this is your chance! All bar one of my yarn bases are names after Cheshire place names, so what should this one be? I’m thinking the sparkle suggests some glamour, so have at it people! make some suggestions!
Ok, so I can’t say much at the moment, but if you like crochet, then keep a look out over the next few months as there are exciting developments happening in this little part of Cheshire.
New weights in old friends…
The “K” word…
So excited I could burst!!!
In addition to this, there are still a couple of spots available in the first Round of the Fibre Explorers’ Club.
This is a quarterly club, with Round 1 covering the first quarter of 2016. Each month for the three months’ duration you will receive 150g of fibre, hand dyed by me in a not-to-be repeated colourway. Sometimes the fibre may be a familiar face, sometimes it may something a little less common. It may even be a special blend created specifically for the club. What I can promise is that each month’s parcel will contain 150g of fibre of which at least 75% is British (or British Overseas Territory) wool. It will probably be combed tops… but might not be! After all, we are exploring, right? The club will cost £50 per quarter, which includes postage, and each month’s parcel will be sent out by the 20th of the month. It is a three month subscription – so what are you waiting for?
So in our geographical tour of Cheshire, this week we land in the heart of the footballers’ wives territory, Wilmslow. Wilmslow is just over 10 miles south of Manchester. According to Wikipedia the town “is known for its upmarket lifestyle and its many rich and famous residents. It is one of the most sought-after places to live in the UK after central London, and … has one of the highest proportions of wealthier residents in the North of England. The town has boutique shops, cafes and restaurants, and high-marque car showrooms which cater for those associated with the “Cheshire Set” lifestyle.” Somewhat removed from my life then! However I do like Wilmslow, it has nice shops and one of the first Starbucks in my part of Cheshire! I think today’s featured yarn is a bit special, hence the name.
Wilmslow is one of the first bases I dyed, but it’s been unavailable for a while, so I have held back all my stocks for the launch of the new on-line shop (so excited that it’s finally happening next week!) It’s a DK yarn, made from a blend of Blue Face and Masham and is, of course, 100% British. It was spun in Yorkshire. It’s a 2 ply with a marked twist structure and has been Superwash treated.
Wilmslow is dyed in a range of semi-solids and tonals. You may be able to spot what my inspiration was when I was during these! It comes in 100g skeins, with 240m per skein (approx) and retails for £12 per skein.
This week’s featured yarn is the yarn I have been working with for the longest period of time. It was one of the first two yarn bases I named (sadly the other, a gorgeous DK is no longer available), when I decided that I was going to name the yarn bases after settlements in Cheshire. Nether Alderley is a small village of just over 500 inhabitants (about half the size of Chelford?) and is about half a mile from Alderley Edge, a larger village that lies below a thickly wooded sandstone ridge of the same name, which is one of my favourite spots in the county.
Good view, huh? If you ignore the loon trying to get the perfect jump selfie, that is…
Anyway, back to our tour of Cheshire. Nether Alderley is not far from Wilmslow and therefore falls into the “footballer belt”. Both David Beckham and Ole Gunnar Solskjær have lived there. so did Neil Hamilton, when he was MP for Tatton. Moving on…
Nether Alderley is a 4ply 100% British Blue Faced Leicester that is spun in Yorkshire. It has a high twist that gives super stitch definition, so it looks great when used for lace projects. The high twist also makes it harder wearing than a standard 100% BFL 4ply, so it works for socks too (I know, I know, some of you just much prefer to have nylon in there to guard against the friction!). The yarn is a little plumper than Chelford, with 110g in each skein, yielding approximately 385m.
I have been slowly running down the Nether Alderley in the Etsy shop, as it was the last of the original stock I bought, but never fear, I have a lot dyed up ready for the summer shows and the new website launch. Due to the worldwide rise in the price of Blue Face Leicester, the new stock will be on sale at £14.50.
Go on then, what would you make with a skein of Neither Alderley?
Today’s featured base is what I think of as my workhorse yarn base, Chelford.
It was my first foray into custom spinning. Although Mobberley is a custom spun yarn, as I mentioned in this post it was not originally spun for me. The story behind Chelford sprang from a comment a friend and customer made about some of my yarns: “I love these colours, but I won’t buy sock yarn if it has no nylon in it”. At that time, none of my yarns contained nylon, so I set about trying to find a British wool/nylon mix. I thought it would be straight forward, but either the wool was a blend of unspecified breeds, or it was spun in the UK but sourced from South America… I was determined I wanted the wool to be an identifiable breed (or mix of breeds) and I wanted it to be British – after all, that is the whole premise behind Yarns From The Plain. I returned to several mills but I couldn’t find what I was after, so I ended up clicking on the link on one mill’s website to their “commissioned yarn” section. I discussed my requirements with them and they were prepared to complete a smaller than usual run for me, with them taking 25kg as an experiment and me taking 50kg (Note that “small” is relative – the Big Boys’ idea of a small run is still a lot bigger than a mill like Fibre Harvest, who spin Mobberley for me in Devon. I can order a mere 6kg of a yarn from them if I wish!).
We made the arrangements for a 75% British Blue Faced Leicester/25% nylon blend, spun as a smooth skinny 4ply with approximately 400m per 100g and it was only the day before we green-lit it that I discovered that although the BFL was sourced and prepped in the UK, it would actually be spun in Italy, as the mill preferred the quality of finish.
After some soul-searching and consultation with the Twitterverse (God bless you all!) I decided that it was more important that the wool came from the UK. Even using a big organisation like this, it still took about 4 months for the yarn to arrive and took up a huge amount of space – having never ordered more than 10kg at a time before, I just wasn’t ready for how big the boxes were!
It took a while before I had time to delve into one of the boxes for some trials, and when I did, I have to say, my heart sank. The yarn felt so crispy as to almost be crunchy (but without the toothy qualities of, say North Ronaldsay) – not at all the soft Blue Faced Leicester I had hoped for. But I should not have despaired. The moment I pulled the first dyelot out of the pot and rinsed it I could feel a difference, and when it dried, it had a lovely handle. I am very pleased with it and it is easily my best selling yarn. It takes dye well and is superwash treated. I have to confess to not yet having finished a swatch to fling into the washing machine to see how well my final citric acid simmer holds the dye, but that is on my evergrowing list of jobs to do! I have used pale colours to knit baby clothes and I love weaving scarves with it too:
This is woven with the two outer greys in the photo earlier in this post. I love it, and luckily so does my husband, the intended recipient!
For those interested, Chelford is a small village about halfway between the towns of Knutsford and Macclesfield, with a weekly livestock market.
So I thought that it was about time I introduced you to my woolly babies! I have a number of different yarn bases, all using British wool, although not all bases are currently available in the shop. The first base I want to introduce you to is Mobberley.
Now, many of my local customers have realised, but my wider customer base may not have done, that my yarn bases are all named after towns and villages in Cheshire (well, all except one but that’s for another post!). Mobberley is a village between Wilmslow and Knutsford, close to Manchester Airport. I love little nuggets of useless information and I was delighted to be reminded that Mobberley was the home of George Mallory, the mountaineer.
The base is custom-spun in Devon, from 70% Exmoor Blueface and 30% British Alpaca. It was originally spun for LaalBear, but I bought her undyed stock and the mill were happy to continue to spin the blend for me. However, this does mean that it isn’t a yarn I can restock from a warehouse, so currently only have an aranweight in stock in the Etsy shop. Don’t worry, I do have some waiting for my new shop launch, which should be very soon!
The Exmoor Blueface is local to the mill in Devon and is a cross between the Exmoor Horn and Blue Faced Leicester. The Exmoor Horn contributes hard wearing attributes, whilst the Blue Faced Leicester gives softness. Blending with the British Alpaca gives the finished a halo typical of alpaca blends and the overall yarn is soft to handle.
It comes in three weights; 4 ply, DK and Aran weight. Each skein weighs 100g , with 4ply being 333m, DK being 250m and Aran being 176m per 100g. In terms of construction, the 4ply weight is (confusingly) made up of 3 plies, as is the Aran weight, which leads to a plump yarn with good squish factor. The DK weight is constructed from 4 plies and is a firmer yarn, but no less soft.
I absolutely love this yarn and think it is great for all sorts of accessories. The fine halo gives a nice finish, and I love using it as weft in weaving. It makes cosy socks, with some stating that the Exmoor Blueface makes it hardwearing enough for boot socks, but I haven’t made a pair yet so cannot vouch for that. A fine lace pattern would be softened by the alpaca halo, which gives the finished piece charm. I find it a very warm yarn, due to the loft, particularly in the 4ply.
It takes colour beautifully, but due to the alpaca content, perhaps more softly than other bases. I love dyeing it and wish I had Hermione’s time turner so I could knit all the things I want to in this yarn!